Hose Components

• The Polaris hose has 2-10′ sections of supply hose and 1 – 10′ section of leader hose connected together by swivels.

• The Universal Wall Fitting & Quick Disconnect attach the hose to the booster pump line.

• The Backup Valve re-positions the Polaris as it runs.

• The In-line Screen removes particles which could clog a jet in the Polaris cleaning head.

31 Feet of Hose

• Quick disconnect fitting with black pressure release

• Backup Valve

• Swivels & Floats

• In-line Screen

Why Size Your Pool Cleaner Hose?

• A hose that is too long will wrap around itself causing poor coverage.

Sizing the Hose

• Connect the hose to the wall fitting and stretch it to the farthest point of the pool.

• It should be 6″ long or short of the farthest point.

• Measure the excess and remove the entire hose from the pool.

• The leader hose attaches to the cleaner head. It must be sized to the depth of the pool. If you don’t know the depth, measure the pool depth by using a telescopic pole.

• Disconnect the leader hose at the swivel which connects it to the supply hose. Cut the leader hose to match the pool  depth and reattach it to the swivel.

• Disconnect the 2 Supply hoses at the other swivel and cut off even amounts of the remaining excess, from each hose. Attach the Polaris cleaner to the leader hose and install.

Hose Example

• In this example, the total hose is 8′ too long.

• The depth of the pool is 6′

• The Leader hose must be sized to the depth of the pool, so 4′ is removed from the Leader hose

• After sizing the Leader hose, the total hose is still 4′ too long.

• Disconnect the Supply hoses at the swivel and cut off 2′ from each

• You have removed 8′ of hose and the total hose is now properly sized.